Skip Navigation Website Accessibility
PADI SDI TDI SCUBA

EQUIPMENT SERVICES
Regulators

1. Regulator Check- performed yearly to ensure regulator is in proper working condition. Check 1st stage for proper intermediate pressure and 2nd stages for proper breathing performance.
2. Regulator Service- performed every two years (or by manufacturer recommendation). Complete disassembly of all stages. Thorough cleansing of all components and replacement of major internal components and o-rings. Complete reassembly and fine tuning to manufacturer guidelines.
3. Regulator Assembly- If you need your set of regulators assembled, bring them in for professional assembly.
-Free professional assembly and tuning with setups purchased from SJS.

Tanks

1. Fills- South Jersey Scuba can fill air, enriched air, trimix and Oxygen. Paintball tanks too! 
SJS DOES NOT FILL ANY ALUMINUM TANK OLDER THAN 1990.
2. Visual Inspection (VIP)- Performed yearly. Includes complete removal of tank valve, external inspection of tank for damages, and internal inspection for contaminants or corrosion. Includes o-ring replacement, VIP sticker, air fill. Enriched air additional.
3. O2 Cleaning with VIP- Performed with Hydro and/or as needed. Includes complete removal of tank valve, external inspection of tank for damages, and internal inspection for contaminants or corrosion. Complete cleaning of tank interior (tumbling) and valve for Oxygen use. Includes o-ring replacement, VIP sticker, air fill (enriched air additional).
4. Hydrostatic Testing- Performed every 5 years. Tanks are tested for leaks and overall integrity.
5. Valve Rebuild- Includes complete disassembly, cleaning, and replacement of internal working components of valve. Suggested in combination with Hydro testing. Applies to certain valves only.

Buoyancy Devices

1. BCD Check- Includes leak test of BCD, cleaning and inspection of inflator for proper performance.
2. BCD Service- Includes cleaning of BCD both inside, outside, inflator, and leak test.
3. BCD Assembly- Assembly of custom harness system, backplate/wing, sidemount, and rebreather set up
-Free professional assembly and adjustments with purchase from SJS
Computers

1. Battery Change- Replacement of computer battery and o-ring examination
2. Computer Assembly- If you need your computer setup, a transmitter put on your 1st stage, or sync together, bring it in for professional calibration.
3. Computer Pressure Test/Simulator- Leak test, and complete dive simulation to verify proper computer function.
-Free professional assembly and adjustments with purchase from SJS
Additional Services

1. Breakdown and setup of doubles and sidemount tanks
2. Drysuit setup and repairs
3. Pool Time for testing of equipment.
-1hour included free of charge with purchase of BCD or Regulator from SJS
4.  Contact or visit us to discuss any additional needs